Aix Could Not Load Programusr/opt/ware/bin/rpmlasopafs

Posted By admin On 22/08/21

I am trying to install Python 3 on a AIX server. I got the Python 3 RPM file for AIX from here. There were few dependencies that needed to be installed before installing Python, but I chose to install it without having installed any dependency through nodeps. Now when I execute a. To see the details of installed file sets: #lslpp -l To list the installation history of all file set in bos.net packages: #lslpp -ha bos.net. To list the files in the bos.rte package. To see the details of installed file sets: #lslpp -l To list the installation history of all file set in bos.net packages: #lslpp -ha bos.net. To list the files in the bos.rte package. If libncurses is not installed then install it and try again. Sudo apt-get install libncurses5:i386. Or sudo apt-get install libncurses5 for 64 bit binaries. Also install the collection of libraries by using this command sudo apt-get install ia32-libs.

  1. Aix Could Not Load Programusr/opt/ware/bin/rpmlasopafs Bearing
  2. Aix Could Not Load Programusr/opt/ware/bin/rpmlasopafs Flow
  3. Aix Could Not Load Programusr/opt/ware/bin/rpmlasopafs Data
  4. Aix Could Not Load Programusr/opt/ware/bin/rpmlasopafs Slow
  5. Aix Could Not Load Programusr/opt/ware/bin/rpmlasopafs Windows 10
  6. Aix Could Not Load Programusr/opt/ware/bin/rpmlasopafs Command
  7. Aix Could Not Load Programusr/opt/ware/bin/rpmlasopafs Smart
Sun StorEdge 3000 Family 2.5 Software Installation Guide
C H A P T E R 6
Installing the Software on an IBM AIX Host

This chapter provides procedures for installing Sun StorEdge Configuration Service, Sun StorEdge Diagnostic Reporter, and the Sun StorEdge Command-Line Interface (CLI) on an IBM AIX host. Topics covered in this chapter are as follows:

System Requirements

This section lists the system requirements for the IBM AIX host.


Note - A web browser is required to view the online help. If you encounter help display problems, update your browser to a more recent version.If you manage storage through the web, you will need Firefox 1.x, Netscape 4.79, or Mozilla 2.1, or later versions of these products. Refer to the Sun StorEdge 3000 Family Configuration Service User’s Guide for details on web-based management.

  • TCP/IP-compliant network interface - Each console must have a TCP/IP- compliant network interface (such as an Ethernet or Token Ring network card, or a serial line with a modem). Each agent must have a TCP/IP-compliant network interface and driver set (included with the operating system).
  • Color monitor - The console is best viewed with a monitor resolution of 1024 x 768 pixels with 256 colors.
  • Operating system, memory, and disk space - The following table lists the system requirements for the IBM AIX operating system.

  • TABLE 6-1 AIX System Requirements for Sun StorEdge Configuration Service, Sun StorEdge Diagnostic Reporter, and Sun StorEdge CLI

    IBM AIX OS Version

    Memory

    Disk Space

    5.1, 5.2, and 5.3

    256 Mbyte minimum,

    512 Mbyte recommended

    40 Mbyte minimum,

    100 Mbyte recommended


Installing the Software

Sun StorEdge Configuration Service software includes the following components:

  • Sun StorEdge Configuration Service agent
  • Sun StorEdge Configuration Service console
  • Sun StorEdge Diagnostic Reporter (optional utility)
  • Sun StorEdge CLI

Note - Before installing Sun StorEdge Configuration Service, be sure to read the release notes for your array.

Note - You must be superuser to install Sun StorEdge Configuration Service and run the console.

Aix Could Not Load Programusr/opt/ware/bin/rpmlasopafs Bearing


Upgrading Software - Agent and Console Version Compatibility

Because the communication protocol changes from version to version, you must install both the agent and console when upgrading. If different versions of the agent and console co-exist, Sun StorEdge Configuration Service is not able to discover previously configured arrays.

Installation Packages

The installation packages are contained on the Sun StorEdge 3000 Family Professional Storage Manager CD, and include the following files:

  • SUNWscsd.bff - Sun StorEdge Configuration Service agent
  • SUNWscsu.bff - Sun StorEdge Configuration Service console
  • SUNWscsa.bff - Sun StorEdge Diagnostic Reporter agent
  • SUNWscui.bff - Sun StorEdge Diagnostic Reporter Config Tool (UI)
  • SUNWsccli.bff - Sun StorEdge CLI

See To Download and Install the Updated Software From the Web Site for steps on how to download the software from the Sun Download Center web site.

Install the agent on each host that is part of Sun StorEdge Configuration Service. Install the console on the computer or workstation you plan to use for managing and maintaining the storage system.

The console can be installed on the host or on any client system. The agent must be installed on the host to which the storage is attached.

Complete the following steps to install the agent, console, or both. You must install at least one agent and one console for the program to run.

If you are upgrading, you must install both the agent and console. If different versions of the agent and console co-exist, Sun StorEdge Configuration Service is not able to discover previously configured arrays.


Note - Sun StorEdge Configuration Service on IBM AIX supports Sun Java runtime environment 1.2.2 to 1.5 and IBM Java runtime environment 1.2.2 to 1.4. Make sure that a compatible version of Java runtime environment is installed on the computer or workstation on which you are installing Sun StorEdge Configuration Service.

To Download and Install the Updated Software From the Web Site

If the Sun StorEdge 3000 Family Professional Storage Manager CD is not available, you can download the software from the Sun Download Center web site.

Aix could not load programusr/opt/ware/bin/rpmlasopafs flow

1. Go to:

http://www.sun.com/software/download/

2. Under System Administration Storage Management, click the StorageTek 3000 Family Storage Products - Related Software link.

You are taken to the Sun StorEdge 3000 Family Storage Products - Related Software page.

3. Click Download.

4. If not previously registered, register.

a. Click the Register Now link at the bottom of the left column.

b. On the registration page, enter applicable data in the required fields and click Register.

5. Log in.

Aix could not load programusr/opt/ware/bin/rpmlasopafs command

a. Type your Username and Password in the left column, and click Login.

b. On the Terms of Use page, read the license agreement, click Yes next to Accept, and click the Continue button.

6. On the software download page, click the link for your array and operating system.

7. In the dialog box that is displayed, specify a destination directory and save the file.

8. Change to the directory that the file was downloaded to and unzip the file.

9. Type:

where filename is the name of the file that was downloaded.

Load

10. To install the agent, type:



11. To install the console, type:

After the agent or console is installed successfully, “SUCCESS” is displayed in the Result column of the Installation Summary.

12. Specify a path to the default web browser.

To access Sun StorEdge Configuration Service online help, Netscape Navigator must be installed on the system on which you are installing the console. Versions earlier than 4.08 are not supported. If a web browser is not detected, you are asked to specify the path to the web browser.

Netscape Navigator is usually installed in /usr/bin/netscape.


Note - You can configure the web browser path name at any time; however, if you do not specify a path name at some point, you cannot access online help.

The agent is installed in /usr/SUNWsscs/ssagent. The console is installed in /usr/SUNWsscs/sscsconsole.


Note - If you know that a supported Java runtime environment is installed but the installation program cannot find it, see Troubleshooting.

To Install the Sun StorEdge Configuration Service Agent and Console From the CD

1. If Java runtime environment software is not installed on the computer or workstation on which you are installing Sun StorEdge Configuration Service, install it now.

To check the Java runtime environment software version, type:



2. Insert the Sun StorEdge Professional Storage Manager CD and type:

3. To install the agent, type:



4. To install the console, type:

After the agent or console is installed successfully, “SUCCESS” is displayed in the Result column of the Installation Summary.

5. Specify a path to the default web browser.

To access Sun StorEdge Configuration Service online help, Netscape Navigator must be installed on the system on which you are installing the console. Versions earlier than 4.08 are not supported. If a web browser is not detected, you are asked to specify the path to the web browser.

Netscape Navigator is usually installed in /usr/bin/netscape.


Note - You can configure the web browser path name at any time; however, if you do not specify a path name at some point, you cannot access online help.

The agent is installed in /usr/SUNWsscs/ssagent. The console is installed in /usr/SUNWsscs/sscsconsole.


Note - If you know that a supported Java runtime environment is installed but the installation program cannot find it, see Troubleshooting

To Install Sun StorEdge Diagnostic Reporter


Note - You must install the Sun StorEdge Configuration Service agent before installing the Sun StorEdge Diagnostic Reporter agent and Config Tool.

1. If Java runtime environment software is not installed on the computer or workstation on which you are installing Sun StorEdge Diagnostic Reporter, install it now.

To check the Java runtime environment software version, type:



2. If you are installing the software from the web site, follow Step 1 through Step 9 in To Download and Install the Updated Software From the Web Site, and then go to Step 4.

3. If you are installing the software from the web site, insert the Sun StorEdge Professional Storage Manager CD and type:

4. If you installed the software from the web site, to install the agent, type:



If you installed the software from the CD, to install the agent, type:

5. If you installed the software from the web site, to install the Config Tool (UI), type:



If you installed the software from the CD, to install the Config Tool (UI), type:

After the agent or console is installed successfully, “SUCCESS” is displayed in the Result column of the Installation Summary.

The agent is installed in /usr/SUNWsscs/ssdiagreporterd. The Config Tool is installed in /usr/SUNWsscs/ssdiagreporterui.


To Install the Sun StorEdge CLI

The CLI enables you to perform many of the same operations you perform by choosing menu options from the firmware application or Sun StorEdge Configuration Service. CLI commands have the advantage of being scriptable, which is especially useful in large data center environments with many arrays that need to be configured similarly.

1. If you are installing the software from the web site, follow Step 1 through Step 9 in To Download and Install the Updated Software From the Web Site, and then go to Step 3.

2. If you are installing the software from the CD, insert the Sun StorEdge Professional Storage Manager CD, and type:



3. If you installed the software from the web site, type:

If you installed the software from the CD, type:



Aix Could Not Load Programusr/opt/ware/bin/rpmlasopafs Flow

After the CLI is installed successfully, “SUCCESS” is displayed in the Result column of the Installation Summary.

The CLI is installed in /usr/SUNWsscs/sbin/sccli.


To Stop or Start the Agents

The Sun StorEdge Configuration Service and Sun StorEdge Diagnostic Reporter agents can be stopped or started manually.


Note - You must be superuser to start the agents.

If you use start without first using stop, the script restarts any agents that have stopped. If all the agents have stopped (as with a stop option) the script reconfigures the runtime environment before restarting the daemons.


To Stop or Start the Sun StorEdge Configuration Service Agent

To stop the Sun StorEdge Configuration Service agent, type:

To start the Sun StorEdge Configuration Service agent, type:




To Stop or Start the Sun StorEdge Diagnostic Reporter Agent

To stop the Sun StorEdge Diagnostic Reporter agent, type:

To start Sun StorEdge Diagnostic Reporter, type:




To Determine Whether Agents are Running

To determine if the agents are running, type:

Both ssmon and ssserver are displayed in the output if the Sun StorEdge Configuration Service agent is running. If Sun StorEdge Diagnostic Reporter is running, ssdgrptd is displayed. If you have enabled SNMP trap generation, you also see the name sstrapd.

Aix Could Not Load Programusr/opt/ware/bin/rpmlasopafs Data

Users and Passwords

The following sections explain how to create users and passwords.

Administrative (User) Security Levels and Guidelines

If you are running the program on an IBM AIX host, administrator security levels are automatically created during the installation process. You only need to set passwords and assign users according to the desired permission level.

Administrative functions require access logins and passwords to prevent the possibility of one administrator reallocating or removing storage resources belonging to other clients and hosts without authorization.

You assign separate passwords for the three levels of security for the program. You do this by setting up three users on the agents that have storage devices that are managed by the program. These three users are automatically added during the installation of the agent.

The security levels must have these exact names:

  • ssmon

Represents the monitoring level of the software.

  • ssadmin

Represents the administration level of the software and provides access to the Rebuild, Parity Check, and Schedule Parity Check functions, as well as monitoring.

  • ssconfig

Represents the configuration level of the software and gives the installer direct access to the configuration functions and all other related aspects of the program.

These names are required for the three security levels. After installation, you must assign a password to each security name.


Note - User passwords are deleted when Sun StorEdge Configuration Service is uninstalled. If you had a previous configuration, you have to reenter the ssmon, ssadmin, and ssconfig passwords.

Note - In the event that one of these usernames is already in use, either modify the existing username, use one of the other Sun StorEdge Configuration Service usernames, or combine the two roles.

The ssmon, ssadmin, and ssconfig names are logins that correspond only to security levels within the program. For UNIX operating environments, the default shell for these accounts is assigned to /bin/false to prevent the user IDs from being used for interactive logins.

You can set up Sun StorEdge Configuration Service so that monitoring does not require users to type the ssmon password. To do so, select the Auto Discovery option when the hosts are added to the Managed Servers list at the console. You can set up these three logins and passwords locally on each host. (The accounts can have different passwords on each host, if desired.)

Once you have set up these three logins on the agents to be managed, the system administrator typically provides user access to the program by assigning employees appropriate passwords, which are based on the level of security required to complete tasks. For example, everyone who has administration privileges on a particular host is assigned the same password that was established for the user ssadmin.


Note - To add servers to the Managed Servers list, refer to the Sun StorEdge 3000 Family Configuration Service User’s Guide.

Aix Could Not Load Programusr/opt/ware/bin/rpmlasopafs Slow


To Create Passwords and Permissions

Create a password for each of the new users by typing:

You will be prompted to re-enter the password before receiving confirmation.

Administrators might also want to change group permissions, which are defined in thesvrlist.dat file located in the /usr/SUNWsscs/sscsconsole directory during installation.

The console is a Java technology-based utility, and as such, cannot provide facilities to control permissions or ownership of files that Sun StorEdge Configuration Service creates. The svrlist.dat file is easily readable by various forms of ASCII text processors. It contains the encrypted password for the user ssmon and can be decrypted.


Note - Do not change the permissions and group ownership of svrlist.dat after adding all agents that are being monitored.

Uninstalling the Software

You must uninstall all components of Sun StorEdge Configuration Service when upgrading to a newer version of the software. Note that some files are not removed because they are created after the installation and are still valid for the upgrade environment.


To Uninstall Sun StorEdge Configuration Service

Use the installp -u command followed by the package you want to uninstall,.SUNWscsd (agent) or SUNWscsu (console).


To Uninstall Sun StorEdge Diagnostic Reporter

Use the installp-u command followed by the package you want to uninstall, SUNWscsa (agent) or SUNWscui (Config Tool).




To Uninstall the Sun StorEdge CLI

Use the installp -u command to uninstall the CLI.

Troubleshooting

Java Runtime Environment 1.4

If IBM Java runtime environment 1.4 is installed on your Linux host, the Sun StorEdge Configuration Service installation procedure might report that Java is not installed. This is because Java 1.4 has no rt.jar file in its lib path. If this happens, perform the following steps.

1. Change to the java_home/lib directory, where java_home is the Java runtime environment’s home directory.

2. Create an empty file and call it rt.jar.

New top mixtapes releasedmixtapes stream and download free download

3. Perform the Configuration Service installation procedure again.

4. If you still get an error, check the Java install path as described in Java Version Mismatch.

Java Version Mismatch

When installing Sun StorEdge Configuration Service, running java -version might return a pre 1.2.2 software version even if the machine has Java runtime environment 1.2.2 or higher installed. If this happens, check that there is a link from Java runtime environment software to the latest version.

1. Check the /usr directory to confirm there is a link to the latest version of the Java runtime environment by typing:

2. If the link is not to the latest version listed, type:



where xxx is the latest version of the Java runtime environment software.


Sun StorEdge 3000 Family 2.5 Software Installation Guide817-3764-18

Copyright © 2009 Sun Microsystems, Inc. All rights reserved.

Last updated on MARCH 06, 2019

Applies to:

Oracle Database - Standard Edition - Version 11.1.0.7 to 11.2.0.3 [Release 11.1 to 11.2]
IBM AIX on POWER Systems (64-bit)

Aix Could Not Load Programusr/opt/ware/bin/rpmlasopafs Windows 10

Aix Could Not Load Programusr/opt/ware/bin/rpmlasopafs

Symptoms

Below error messages are reported in AIX boot log

Method error (/usr/lib/methods/startacfsctl):
0514-068 Cause not known.
exec(): 0509-036 Cannot load program /usr/lib/methods/defacfsctl.bin because of the following errors:
0509-150 Dependent module libhasgen11.so could not be loaded.
0509-022 Cannot load module libhasgen11.so.
0509-026 System error: A file or directory in the path name does not exist.

Method error (/usr/lib/methods/startadvmctl):
0514-068 Cause not known.
exec(): 0509-036 Cannot load program /usr/lib/methods/defadvmctl.bin because of the following errors:
0509-150 Dependent module libhasgen11.so could not be loaded.
0509-022 Cannot load module libhasgen11.so.
0509-026 System error: A file or directory in the path name does not exist.

Method error (/usr/lib/methods/startacfsctl):
0514-068 Cause not known.
exec(): 0509-036 Cannot load program /usr/lib/methods/defacfsctl.bin because of the following errors:
0509-150 Dependent module libhasgen11.so could not be loaded.
0509-022 Cannot load module libhasgen11.so.
0509-026 System error: A file or directory in the path name does not exist.

Method error (/usr/lib/methods/startadvmctl):
0514-068 Cause not known.
exec(): 0509-036 Cannot load program /usr/lib/methods/defadvmctl.bin because of the following errors:
0509-150 Dependent module libhasgen11.so could not be loaded.
0509-022 Cannot load module libhasgen11.so.
0509-026 System error: A file or directory in the path name does not exist.

Method error (/usr/lib/methods/startacfsctl):
0514-068 Cause not known.
exec(): 0509-036 Cannot load program /usr/lib/methods/defacfsctl.bin because of the following errors:
0509-150 Dependent module libhasgen11.so could not be loaded.
0509-022 Cannot load module libhasgen11.so


Cause

To view full details, sign in with your My Oracle Support account.

Don't have a My Oracle Support account? Click to get started!

In this Document

Aix Could Not Load Programusr/opt/ware/bin/rpmlasopafs Command

Symptoms
Cause

Aix Could Not Load Programusr/opt/ware/bin/rpmlasopafs Smart

Solution
References


My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.