Boot Camp Windows Mac File Sharingyellowtickets

Posted By admin On 23/08/21
  1. Mac File-sharing Software
  2. Mac Mp3 Sharing
  3. Activate Windows Boot Camp Mac

Both Windows and Mac OS X can see each other’s files, but they can’t write to the other operating system’s partition. Thankfully, there are ways around these file-system limitations. Third-party applications can enable write support for these partitions, while you can also share files in other ways. Share Files From Mac OS to Windows 10. To share files and folders between Mac OS and Windows 10, you need to install any software or use third party tools, just follow the article step by step. Ok, now go to Mac, open System Preferences and click on Sharing. System Preferences. Now turn on file sharing from service and click on + icon.

Exe files are Windows executable files designed for Window users. So apple user can’t run these files on their mac. However there are ways which enable apple user to run these exe files on Mac.


If you are one of those Mac user which is looking for different methods of running exe files on your Mac then you are right place. This article will teach you two important methods on How to run Windows executable (Exe) files on Mac without Windows.


  • 1 How to Run EXE Files on Mac

How to Run EXE Files on Mac

There are ideally 2 methods to run EXE files on Macbook. You can Run EXE on Mac either using WINE software using boot camp feature of your mac. Wine is a software which can be downloaded and installed for free. New page.

These two methods are little lengthy and complicated therefore all the steps must be followed with properly and carefully.

1. Run EXE on Macbook using WINE software

One of the popular method to run exe files on your Mac is to install WINE software which can be downloaded for free. Follow these steps to use WINE for running Exe files on your Mac.

  1. The first step is to download the WINE software from its the official website winebottler.
  2. Go to winebottler website –
  3. Now on its website you will see the option of winebottler 1.8 rc4 development in the middle of the page with green arrow pointing downwards.
  4. Now pop up will appear seeking your permission for downloading the said program. Click on download and continue.
  5. Now you will be taken to advertising screen. You can skip that ad by clicking on skip ad on the top right corner of your screen. If the skip ad option is not there then wait for sometime tell it appears
  6. After skipping add your download will begin.
  7. If download doesn’t begin in sometime then click again on winbottler 1.8 rc4 development option to retry.
  8. Next step is to install the software. For that double click on winebottler file.
  9. After that press on icons of both winebottler and wine and drag them into application folder.
  10. Now look a exe file and right click on it to open drop-down menu.
  11. In drop-down menu you will see the option of open with click on that.
  12. Now another popup menu will appear where you can see wine with its icon.
  13. Click on that wine to open your exe files.
  14. Now another menu asking to run directly in will appear. Make sure run directly option is clicked on if not then press on the circle adjacent to it.
  15. After then press Go on that menu and you are done.

If your exe file supports wine then it will start loading. However sometimes programs and files do not support wine and thus your exe files won’t run using wine. In that case you have to look to the next method which involves boot camp feature of Mac to Run Exe files on Macbook.

2. Open EXE Files on Macbook using boot camp

Another method of running exe files on your Mac is using bootcamp. Follow below steps carefully to implement this method for making sure exe files open on your Mac.

  1. The first step is to download ISO file from
  2. Once ISO file is downloaded then search for utilities in the top right corner of your Mac screen by clicking on the magnifying glass icon.
  3. Now click and open utilities folder.
  4. Under utilities folder you will see boot camp assistant Icon double click on that.
  5. Now an introduction menu will appear please continue to proceed further.
  6. Now the process of setting up your boot camp settings will begin.
  7. Once the above process is completed wait for your Mac to reboot.
  8. On rebooting your Mac will ask to select the system to open your computer with.
  9. Click on bootcamp Windows before starting your system.
  10. Now instruction regarding Windows setup will appear. Click on accept to continue and install the windows setup.
  11. After doing that your Mac will load into Windows operating system.
  12. Now locate your exe files and double click on it.
  13. Since you are using Windows operating system your exe files will now open and run smoothly.

This bootcamp method of running exe files on your Mac is quite technical and lengthy thus sometimes you may require professionals help and advice before adopting this method because a small mistake while applying this method may cause problems to your Mac.

Boot Camp Windows Mac File Sharingyellowtickets


If you are one of mac users who is unable to open or run Microsoft executable files that is exe files on your Mac then these two methods can help you to open those exe files on your Mac.

Mac File-sharing Software

First method of downloading wine software is quite popular and simple which may help you to overcome your problem. However in some cases first method does not help that much therefore you can look for a second method of boot camp assistant.

Mac Mp3 Sharing

Related Posts:

I recently got a new Mac, and found myself needing to move my Windows 10 Boot Camp partition from my old Mac to the new one. There's a great program called Winclone that can help backup and restore Windows Boot Camp partitions from within OS X. It is $40, but is a worthwhile investment, especially if you don't want to go through the hassle of re-installing and re-configuring Windows.
Although I was able to use Winclone to backup and restore my Windows partition on my new Mac, no matter what I did, I could not get the Windows partition to boot. When restarting my Mac and holding down Option, it would give me the option to select either OS X or Windows, but when selecting Windows, it would immediately boot into OS X, and wouldn't even attempt to start Windows. I re-imaged a few times, but nothing would work. This was perplexing, since I could see a properly formatted NTFS Windows partition from within OS X after restoring the image, and I was even able to browse the contents of the volume.
After much back-and-forth with Winclone support (which is great, by the way), a lot of research, and trial and error, I was finally able to get it to work using the following steps:
  • Make a backup image of the old Windows Boot Camp partition on the old Mac using Winclone
  • Delete any existing Windows partitions from the new Mac using the Boot Camp Assistant or Disk Utility in OS X
  • Download the Windows 10 ISO
  • Use Boot Camp Assistant to create a Windows install disk with a USB drive, and create a new partition, using the slider to adjust how much space you want the Windows partition to consume
  • With the Windows install USB drive plugged in, restart and hold down Option, then select EFI Boot to begin the Windows installation process (boot to the USB drive with the Windows install disk)
  • Go through the Windows 10 install process, clicking 'Skip' when asked for the product key (we will be overwriting this partition in a later step--this is just to get the boot partition table--or GPT--setup properly)
  • After the machine boots successfully to Windows, and you are able to boot into Windows by holding down Option when rebooting, boot back into OS X
  • Assuming you've already imaged your Windows 10 partition with Winclone on the old Mac and transferred it to the new Mac (or loaded it from a shared network drive), launch Winclone, open the previously saved Windows image, and restore it to the newly created Windows 10 partition (it will wipe away the temporary install just created)
  • Use Boot Camp Assistant to create a USB disk with the correct device drivers for Windows
  • Reboot and hold down Option, then select the restored Windows partition, and it should boot into Windows (alternatively, you can boot to Windows using System Preferences -> Startup Disk)
  • Install the updated Windows device drivers using the Boot Camp drivers USB disk just created, then restart

Activate Windows Boot Camp Mac

Perhaps the partition table did not get setup properly when migrating from the old Mac to the new one in my first attempts using Winclone. I believe that going through a plain vanilla install of Windows 10 using the ISO and Boot Camp Assistant properly sets up the partition table and enables you to then restore and boot into the restored Windows image. Hooray for not having to re-install and setup Windows and configure apps and settings again!