You can even hide the Windows taskbar and use this program instead. Various animations of your dock objects are available. You can set the icons on your dock to zoom or spin when you move your mouse over them. The program also supports themes. Themes as well as docklets can be downloaded from the publisher's website. Docklets are small applications created for Objectdock. They enhance the usability of the dock by adding new features like battery life, clock, weather conditions display, Google search, and others.
Two sizes can be defined for the icons. You can set the size of the icons when they are displayed normally as well as their size when you move your mouse over them. Transparency level adjustment is also supported. The thing I like most is that the program can represent each minimized window by its screenshot.
Pluses: The program is very nice looking. It also is easy to configure. Memory usage can be configured by using the program's options menu. It can be set to use as few as 4 MB of your memory.
Drawbacks / flaws: If you replace your default Windows taskbar with this program you won't have access to your system tray icons anymore. You can install a plug-in to make them visible, but the one that I found displayed only some of my tray icons. The permanent solution is to buy this software and you'll have to access a couple of extra features including the system tray.
In conclusion: I like this program very much so I decided to use it. I normally don't use this kind of software but I'll make an exception for this one. It's free so you are more than welcome to try it too.
version reviewed: 1.5
Several days ago I got an error with my OPCOM 2014V Opel diagnostic tool, when I asked help on the forum, I found a nice friend shared the latest op-com FW 1.64, I have not tried yet because my opcom error has not solved, I write down processes, hope these helps.
ObjectDock Plus 1.9: Feature Tour Tabbed Docks, Fly-Out Menus, and more! Wednesday, July 11, 2007 by Island Dog Discussion: ObjectDock. I have used ObjectDock for several years, and when ObjectDock Plus was released, I pretty much jumped to get the upgrade. Objectdock plus crack with serial number key activation crack. Objectdock crack 2016 objectdock keygen objectdock 2.20 serial key objectdock full version free download stardock object desktop 2016 crack objectdock plus. Full software with working crack, Stardock ObjectDock Plus version 2.01.743. QuickBooks Pro 2018 Crack + License Key Latest Version Free IS Here; QuickBooks Pro 2018 Crack Download Latest Version Free Here: Products 1 - 9 - Read Oregon Trail 5th Edition reviews, download trial or demo, see screenshots, FAQs, forum. Software Oregon Trail 5th Edition download torrent. Stardock Objectdock Plus 2.0 » images 9 years 22 MB 0 0 xDark v3.7 » application 9 years 4157 MB 0 0 Stardock Objectdock Plus 2.0.8743 » images 9 years 22 MB 0 0 Stardock ObjectDock Plus v2.0.50727 By Adrian Dennis.rar 10 years 22 MB 0 0 ObjectDock 1.9.zip 4 years 12 MB 0 0 ObjectDock Plus1.5 build 528u+Crack.rar 9 years 11 MB 0 0.
Free download Opcom diagnostic tool FW 1.64:
Notice:All manipulations with the device you are doing at your own risk! (It haven’t been tested yet,just share by forum membmers)
Here is another version Opcom Opel Firmware V1.99 PIC18F458 with software (Tested work 100%)
1. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
4. Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information:
See the presence of the chip. There must be a [PIC18F458]. If there has a [OP-COM] chip then do nothing. You will get a 100% dead of OP-COM
An example, Instead PIC18F458 chip is OP-COM chip, so it can’t be reflashed.
Seen that the chip is PIC18F458, then go to the next step.
How to Setup OP-COM software
Connect OP-COM to the laptop
Then unzip [VAUX-COM_120309a + 131223d_GB + OcFlash China] file to desktop and Run the program [VAUXCOM.exe] to verify the correct installation of the drivers
->Click Test interface
It means that the driver installed properly if the interface appear here. (pictures shown below)
Download the firmware and run the program [OCFlash.exe]
Specify the path to the [FW 1.64.hex]
Run the Test interface again and check that the OP-Com updated to version 1.64
You can now use the program [VAUXCOM.exe]
Vehicle model until 2015
OPCOM VAUX-COM 120309a Windows 7 32bit:
Recently, some OPCOM users respond that “I couldn’t get the cracked software to run on my windows 7 laptop but it was fine on my old XP one….”
Free download VAUX-COM 120309a:
Operation system supported:
Win 7 32bit
How to install OPCOM in WIN7:
The way of installing op-com in Win 7 is the same as that in Windows XP:
Tips on using VAUX-COM 120309a software:
1. Make sure there is dotnetfx35_SP1 patch on your windows XP or Windows 7 laptop, otherwise you are unable to run opcom software.
2.If you install the software on windows 7 laptop, you can only open it as Administrator, kindly check and follow the installation video inside CD
3. Never update it online, It will damage the OP-COM
Open “My Computer/ OP-COM (E:)” to copy all the files to a new established folder named “op-com” in “Local Disk (C:)”.
The send “OP-COM” from”Local Disk (C:)/op-com” to Desktop.
Install software for USB Serial Converter
Click “Next” with the selection of “Install from a list of specific location (Advance)”.
Select “search removable media” and “include this location in the research”, then to “Browse” for “Desktop/My Computer/Local Disk (C:)/op-com/Drivers”. Then click “Next”.
Click “Finish” for successful installation of the software for USB Serial Converter.
Computer management setup
Right click “My Computer” for “Manage”.
Select “Device Manager/PC-201103301537/Universal Serial Bus controllers/USB Srial Converter”.
Close the interface.
Run VAUX-COM 120309a and diagnosis
Open “Shortcut to CP-COM”.
Click “Test Interface”. And click “Close” on “Interface Test Result”.
Click “Save Config” button, click “OK” for “Configuration saved”.
Click “Automatic Vehicle Information”.
…(diagnosis as you want)
(NOTE: this installation instruction can be available for OPCOM 1.45 or 1.59)
OP-COM Successful Test Cases by Customers: